3Com 3CRWE920G73 Panduan Memulai Cepat - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Titik Akses Nirkabel 3Com 3CRWE920G73. 3Com 3CRWE920G73 14 halaman. 54 mbps wireless lan building-to-building bridge family
Juga untuk 3Com 3CRWE920G73: Lembar data (4 halaman), Lembar data (8 halaman)

Halaman Cetak

Find your New Wireless Bridge

To find your new Wireless Bridge you will need to connect the Wireless Bridge to the same physical LAN network as your

PC. By default, the Wireless Bridge will use DHCP Client mode to get an IP address from a DHCP Server. If your network

does not have a DHCP server, the Bridge uses a default IP address of 169.254.X.Y, where the X and Y is the last two bytes

of the MAC address in decimal value respectively. You can use that default IP address to configure the Wireless Bridge

through a web browser directly.

To find your new Wireless Bridge, open the 3Com Wireless Infrastructure Device Manager (WIDMAN) utility. On start up,

the dialog box will look like the figure below:

Click the 'Refresh' button and the 3Com Wireless Infrastructure Device Manager (WIDMAN) utility will begin to discover

devices. After finding the new Wireless Bridge, it will list it in the list box.

Choose the Wireless Bridge in the list box, and then click the 'Configure...' button. The web browser wills pop-up, and it

will bring you to the WEB UI of the Wireless Bridge.

3Com Corporation

Page 10