Aeon Labs Nano Shutter Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengontrol Aeon Labs Nano Shutter. Aeon Labs Nano Shutter 10 halaman.

1. Mounting the gang box.

2. Position all wires to provide room for the device. Place the Nano Shutter inside the gang box towards the back of the

box.

3. Position the antenna towards the back of the box, away from all other wiring.

4. Reinstall the Nano Shutter to the gang box.

5. Reinstall the cover onto the gang box.

Note: 1. The gang box should be sized 3×2×2.75 inch / 75×50×70 mm or larger, minimum volume 14 in / 230cm .

2. Use flexible copper conductors only.

5. Restore Power.

Restore power at the circuit breaker or fuse.

Quick Start.

Adding your Nano Shutter to a Z-Wave network.