Pioneer CDX-M2096ZRN Panduan Servis - Halaman 37

Jelajahi secara online atau unduh pdf Panduan Servis untuk Penerima Mobil Pioneer CDX-M2096ZRN. Pioneer CDX-M2096ZRN 47 halaman. Multi-compact disc player

Halaman Cetak

1. Operations and Specifications

4. Press key B to set ELV/TRAY mode to TRAY.

5. Press key FWD to release the clamp and return the tray to

the magazine.

6. Press key B to enter Elevation Move mode.

7. Use key FWD/REV to operate elevation and set if to the graduation of the fourth

step (Fig. 1).

8. Make the adjustment.

Use VR802 to adjust the difference in potential between EREF and EPVO to 0 ±20

mV.

9. When adjustment is completed, press key BAND/REL to exit

Mechanism Test mode.

10. Confirm operation of the mechanism.

Place the mechanism horizontally (CD core unit below). Take

care not to short-circuit the PCB.

11. Confirm the height of the stage. Use the 6 key to select Disc No.6.

Check if the stopper bend of the clamp lever is engaged in the groove of the frame

stopper (Fig. 2-4).

•Note :

The stopper bend will be pressed downward into the groove for final clamping. Confirm the engagement position

of the stopper bend.

•If the stopper bend is engaged in the center and pressed downward, adjustment is completed. Go to step 15.

•If the stopper bend is dislocated, check the amount of dislocation by following step 12.

CDX-M2096ZRN

Examples of display

key B

TRY mode

ELV mode

TRACK

↔

TRACK

↔

TRACK

↔

TRACK