Pioneer CDX-M2096ZRN Посібник з експлуатації - Сторінка 37
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Автомобільний приймач Pioneer CDX-M2096ZRN. Pioneer CDX-M2096ZRN 47 сторінок. Multi-compact disc player
Друкувати сторінку
4. Press key B to set ELV/TRAY mode to TRAY.
5. Press key FWD to release the clamp and return the tray to
the magazine.
6. Press key B to enter Elevation Move mode.
7. Use key FWD/REV to operate elevation and set if to the graduation of the fourth
step (Fig. 1).
8. Make the adjustment.
Use VR802 to adjust the difference in potential between EREF and EPVO to 0 ±20
mV.
9. When adjustment is completed, press key BAND/REL to exit
Mechanism Test mode.
10. Confirm operation of the mechanism.
Place the mechanism horizontally (CD core unit below). Take
care not to short-circuit the PCB.
11. Confirm the height of the stage. Use the 6 key to select Disc No.6.
Check if the stopper bend of the clamp lever is engaged in the groove of the frame
stopper (Fig. 2-4).
•Note :
The stopper bend will be pressed downward into the groove for final clamping. Confirm the engagement position
of the stopper bend.
•If the stopper bend is engaged in the center and pressed downward, adjustment is completed. Go to step 15.
•If the stopper bend is dislocated, check the amount of dislocation by following step 12.
CDX-M2096ZRN
Examples of display
key B
TRY mode
ELV mode
TRACK
TRACK
↔
76
73
TRACK
TRACK
↔
77
74
TRACK
TRACK
↔
78
75
TRACK
7X
TRACK
37