Pioneer DEH-3200UB Panduan Instalasi

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Penerima Mobil Pioneer DEH-3200UB. Pioneer DEH-3200UB 8 halaman. Cd rds receiver
Juga untuk Pioneer DEH-3200UB: Panduan Instalasi (6 halaman), Panduan Pengoperasian (28 halaman), Panduan Pengoperasian (31 halaman), Panduan Pengoperasian (29 halaman)

Halaman Cetak

CD RDS RECEIVER

AUTORADIO CD RDS

SINTOLETTORE CD RDS

REPRODUCTOR DE CD CON RECEPTOR RDS

CD RDS-EMPFÄNGER

CD RDS-ONTVANGER

CD RDS ПРИЕМНИК

DEH-4200SD

DEH-3200UB

Installation Manual

Manuel d'installation

Manuale d'installazione

Manual de instalación

Installationsanleitung

Installatiehandleiding

Руководство по установке

Printed in Thailand

Imprimé en Thaïlande

CRD4436-A/N

> EW

Installation

English

2. Secure the mounting sleeve by using

Note

a screwdriver to bend the metal tabs

• Check all connections and systems before final

(90°) into place.

installation.

Dashboard

• Do not use unauthorized parts. The use of

unauthorized parts may cause malfunctions.

• Consult with your dealer if installation requires

drilling of holes or other modifications of the

vehicle.

• Do not install this unit where:

— it may interfere with operation of the vehicle.

— it may cause injury to a passenger as a result

of a sudden stop.

• The semiconductor laser will be damaged if it

overheats. Install this unit away from hot places

such as near the heater outlet.

Mounting sleeve

• Optimum performance is obtained when the unit is

installed at an angle of less than 60°.

3. Install the unit as illustrated.

Nut

60°

Firewall or

metal support

Metal strap

Screw

DIN front/rear-mount

This unit can be properly installed either from

"Front" (conventional DIN Front-mount) or

Screw (M4 8)

"Rear" (DIN Rear-mount installation, utilizing

threaded screw holes at the sides of unit

chassis). For details, refer to the following

installation methods.

• Use commercially available parts when

installing.

• Make sure that the unit is installed securely

in place. An unstable installation may cause

DIN Front-mount

skipping or other malfunctions.

1. Insert the mounting sleeve into the

DIN Rear-mount

dashboard.

1. Determine the appropriate position

For installation in shallow spaces, use the

where the holes on the bracket and

supplied mounting sleeve. If there is enough

space, use the mounting sleeve that came with

the side of the unit match.

the vehicle.

Installation

English

2. Tighten two screws on each side.

Tapping screw (5 mm × 8 mm)

Mounting bracket

Dashboard or Console

Removing the unit

1. Extend top and bottom of the trim

ring outwards to remove the trim

ring. (When reattaching the trim ring,

point the side with the groove down.)

Trim ring

• Releasing the front panel allows easier access

to the trim ring.

2. Insert the supplied extraction keys

into both sides of the unit until they

click into place.

3. Pull the unit out of the dashboard.

Fastening the front panel

If you do not plan to detach the front panel,

the front panel can be fastened with supplied

screw.

Screw