Pioneer SUPER TUNER III KEH-5252 Panduan Pemilik - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penerima Mobil Pioneer SUPER TUNER III KEH-5252. Pioneer SUPER TUNER III KEH-5252 21 halaman. Cassette car stereo with fm/am electronic tuner

Halaman Cetak

Using the Tape Deck

Volume/treble/

radio switch

Clock Dolby B-C NR select (KEH-9292) Fast forward/rewind

Dolby NR (KEH-9292, KEH-7272)

Direction indicator

Cassette

Tape select

(KEH-9292, KEH-7272)

Loudness

Music search

(KEH-9292, (KEH-9292, KEH-7272)

KEH-7272)

Music search indicator

(KEH-9292, KEH-7272)

KEH-9292

Direction change

Metal indicator

(KEH-9292, KEH-7272)

Fader

Dolby NR indicator (KEH-9292, KEH-7272) Dolby C NR indicator {KEH-9292)

• Before attempting operation...

• Reduce the volume by turning the volume control knob to the

left.

• Set the fader control to the left horizontal.

1. Insert a tape into the deck to turn the power on and automatically

begin playback. Even if the radio is on, the unit will automatically

switch to and begin tape playback.

2. Adjust the volume and balance.

3. Adjust the tone. To adjust the treble, first pull the knob until a

click is heard. After setting to the desired level, push the knob in

again to its originai position.

4. When tape playback reaches the end of the tape, playback will

automatically switch from the side being played to the opposite

side (ie. Side A to Side B or vice versa) (Auto-reverse). To eject

the tape during playback, simultaneously press the fast forward

and rewind buttons.

• Do not try to eject the cassette immediately after insertion, as it will cause mal

function. Wait a few seconds.

KEH-5252

• Be sure to eject the tape when the vehicle's ignition is turned OFF. Leaving the

tape in the unit can deform the pinch roller causing wow and flutter during tape

playback.

• Fast Forward/Rewind

Since the transport can be in either direction, both the left and right

high-speed tape transport buttons can be regarded as fast forward/

rewind buttons.

For fast forward, press the high-speed tape transport button that

corresponds to the direction that is shown by the direction indicator.

When the end of the tape is reached, playback will automatically be

gin from the opposite side of the tape (Auto-reverse).

For rewind, press the button that is opposite that of the direction

shown by the direction indicator. When the end of the tape is

reached, playback will automatically begin from the beginning of

the same side of the tape (Auto-replay).

Fast forward and rewind can be terminated by pressing the respec

tive opposite high-speed tape transport button.

• Direction Change Button

This button is used to switch from one side of the tape to the other

(from Side A to Side B or vice versa).