Pioneer SUPER TUNER III KEH-5252 Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik samochodowy Pioneer SUPER TUNER III KEH-5252. Pioneer SUPER TUNER III KEH-5252 21 stron. Cassette car stereo with fm/am electronic tuner
Using the Tape Deck
Volume/treble/
radio switch
Clock Dolby B-C NR select (KEH-9292) Fast forward/rewind
Dolby NR (KEH-9292, KEH-7272)
Direction indicator
Cassette
Tape select
(KEH-9292, KEH-7272)
Loudness
Music search
(KEH-9292, (KEH-9292, KEH-7272)
KEH-7272)
Music search indicator
(KEH-9292, KEH-7272)
I
KEH-9292
Direction change
Metal indicator
(KEH-9292, KEH-7272)
Fader
Dolby NR indicator (KEH-9292, KEH-7272) Dolby C NR indicator {KEH-9292)
• Before attempting operation...
• Reduce the volume by turning the volume control knob to the
left.
• Set the fader control to the left horizontal.
1. Insert a tape into the deck to turn the power on and automatically
begin playback. Even if the radio is on, the unit will automatically
switch to and begin tape playback.
2. Adjust the volume and balance.
3. Adjust the tone. To adjust the treble, first pull the knob until a
click is heard. After setting to the desired level, push the knob in
again to its originai position.
4. When tape playback reaches the end of the tape, playback will
automatically switch from the side being played to the opposite
side (ie. Side A to Side B or vice versa) (Auto-reverse). To eject
the tape during playback, simultaneously press the fast forward
and rewind buttons.
• Do not try to eject the cassette immediately after insertion, as it will cause mal
function. Wait a few seconds.
KEH-5252
• Be sure to eject the tape when the vehicle's ignition is turned OFF. Leaving the
tape in the unit can deform the pinch roller causing wow and flutter during tape
playback.
• Fast Forward/Rewind
Since the transport can be in either direction, both the left and right
high-speed tape transport buttons can be regarded as fast forward/
rewind buttons.
For fast forward, press the high-speed tape transport button that
corresponds to the direction that is shown by the direction indicator.
When the end of the tape is reached, playback will automatically be
gin from the opposite side of the tape (Auto-reverse).
For rewind, press the button that is opposite that of the direction
shown by the direction indicator. When the end of the tape is
reached, playback will automatically begin from the beginning of
the same side of the tape (Auto-replay).
Fast forward and rewind can be terminated by pressing the respec
tive opposite high-speed tape transport button.
• Direction Change Button
This button is used to switch from one side of the tape to the other
(from Side A to Side B or vice versa).