Pioneer AVH-P6400CD Panduan Instalasi - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Penerima Pioneer AVH-P6400CD. Pioneer AVH-P6400CD 40 halaman. Pioneer avh-p6400: install guide

Halaman Cetak

Installation

Note:

• Before finally installing the unit, connect the

wiring temporarily, making sure it is all connect-

ed up properly, and the unit and the system work

properly.

• Use only the parts included with the unit to ensure

proper installation. The use of unauthorized parts

can cause malfunctions.

• Consult with your nearest dealer if installation

requires the drilling of holes or other modifica-

tions of the vehicle.

• Install the unit where it does not get in the dri-

ver's way and cannot injure the passenger if there

is a sudden stop, like an emergency stop.

• Do not place the display in a position where it

will impede the driver's visibility or affect the

operation of your vehicle's air bags.

• The semiconductor laser will be damaged if it

overheats, so don't install the unit anywhere hot

— for instance, near a heater outlet.

DIN Front/Rear-mount

This unit can be properly installed either from "Front" (conventional DIN Front-mount) or

"Rear" (DIN Rear-mount installation, utilizing threaded screw holes at the sides of unit

chassis). For details, refer to the following illustrated installation methods.

DIN Front-mount

Installation with the rubber bush

1. Remove the frame. (Fig. 9)

• If installation angle exceeds 30° from horizontal,

the unit might not give its optimum performance.

(Fig. 8)

Frame

Pull out to remove the frame.

(When reattaching the frame, point the

side with a groove downwards and

attach it.)

30°

Fig. 8

Fig. 9