Pioneer DVH-865AVBT Panduan Pengoperasian - Halaman 32
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Penerima Pioneer DVH-865AVBT. Pioneer DVH-865AVBT 40 halaman. Dvd av receiver
Halaman Cetak
Appendix
05
Additional information
Symptom
The repeat range
changes automatically.
The sound from the
Bluetooth audio source is
not played back.
Error messages
When you contact your dealer or your nearest
Pioneer Service Center, be sure to note the error message.
Message
Loading
No Disc
Bad Disc
Unknown disc
Wrong file
content
Video resolution
not supported
Region Error
Error
AMP ERROR
32
En
Cause
Another folder was
selected during repeat
play.
Track search or fast
forward/reverse was
performed during file
repeat play.
There is a call in progress
on a Bluetooth connected
cellular phone.
A Bluetooth connected
cellular phone is currently
being operated.
A call was made with
a Bluetooth connected
cellular phone and
then immediately
terminated. As a result,
communication between
this unit and the cellular
phone was not terminated
properly.
Cause
Disc is being read
Disc is dirty
Disc is upside down
Disc not present in loading
compartment
Disc is dirty
Disc is upside down
Disc format is not compatible with
this unit
The file is not supported.
The video resolutionexceeds
720X576.
DVD is not compatible with region
code of unit
Illegal mechanism operation
Unit fails to operate or speaker
connection is incorrect; protective
circuit is activated.
Action
Select the repeat range again.
Select the repeat range again.
The sound will be played back
when the call is terminated.
Do not operate the cellular phone
at this time.
Reconnect the Bluetooth
connection between this unit and
the cellular phone.
Action
Please wait, it may take several minutes for
some disc or storage device.
Clean disc with soft cloth
Insert disc with label side up
Insert disc
Clean disc with soft cloth
Insert disc with label side up
Change another disc.
Change to a supported file.
Change to a supported file.
Use discs with corresponding regional code.
Press EJECT key for 5 seconds to reset
loading mechanism.
Check the speaker connection. If the message
fails to disappear even after the engine
is switched off/on, contact your dealer or
an authorized Pioneer Service Station for
assistance.