Pioneer VSX-605S Panduan Petunjuk Pengoperasian - Halaman 31
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Penerima Stereo Pioneer VSX-605S. Pioneer VSX-605S 37 halaman. Audio/video stereo receiver
Juga untuk Pioneer VSX-605S: Panduan Petunjuk Pengoperasian (37 halaman)
Halaman Cetak
intelligent
REMOTE SET UP (GUI OPERATION)
L S C System Control
RCA
[MITSUBISHI
SHARP
[sao ra)
ZENITH
|
| GOLD STAR
SISONY
«| B [FISHER
oon
_| 2 [MAGNABOX 1
= [HITACHI
S | MAGNABOX 2 |
opus
ie
a
PANASONIC
same signals.
(Example: Using the 0 buttons for learning)
3. Point your component's remote control at this unit's
remote control unit's sensor window and press the
selected button.
within 50 cm (20 inches) of this unit's
sensor window,
ay Press, holding the remote contral unit
®
If "OK" is displayed, iearning has been completed. if you
want to use another button for learning, repeat steps 2
and 3.
®
If "NG" is displayed, repeat steps 2 and 3.
® When you have completed learning, press the EXIT button.
NOTE:
@ To return buttons you used for learning to their original
settings, press the CLEAR button.
This returns them to the
original Pioneer remote control commands.
® There are no signals in buttons I and Jf so you can use them
for learning.
® Even when OK is indicated during learning, operation may still
not be possible. ff this happens, repeat the learning procedure.
With some manufacturer's components, learning may be
difficult to perform. Learning may also not be possible if the
remote control's batteries are run down. if this is the case, load
the remote control with new batteries and repeat the learning
procedure,
® Even black preset buttons can be used for learning other
commands.
@ Learning a command may not be possible if many commands
requiring a large amount of memory have already been learned
resulting in insufficient memory remaining.
31
<ARBIO59>