Pioneer VSX-D3S Petunjuk Pengoperasian - Halaman 17
Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian untuk Penerima Stereo Pioneer VSX-D3S. Pioneer VSX-D3S 40 halaman. Audio/video stereo receiver
Juga untuk Pioneer VSX-D3S: Panduan Petunjuk Pengoperasian (40 halaman)
Halaman Cetak
NOTE:
Even if the receiver's power cord is unplugged, data remains in
memory for several days. If the contents of the memory are
erased, preset once more.
Last station memory
When the POWER switch is pressed to turn the power on, the
last station received before the power was previously turned off
will be tuned in again. When the power is ON, if the FM/AM
button is pressed, the last station received before the FM/AM
button was previously pressed will be tuned in again.
OPERATING THE AUDIO/VIDEO COMPONENTS
Press the power switch to the ON position, and turn on the power
to the other components you wish to use (for example, TV, VCR,
cassette deck, etc.).
PLAYBACK
1
TAPE 2 MONITOR
1. Use the input selector buttons to select the desired program
source.
If you select a music source other than TAPE 2, switch off the
TAPE 2 MONITOR.
2. Operate the appropriate audio/video component to playback
the program source.
For a video source, switch the TV connected to this unit to the
video input mode.
3. Adjust the volume and tone controls as desired.
Refer to page 19 for details concerning surround operation.
(Surround operation is also possible with GUI. Refer to page
24.)
RECEIVING FM SIMULCAST TV PROGRAMS
By combining a TV set with this receiver, you can receive FM
simulcast TV programs (stereo TV sound transmitted from an
FM radio station) while viewing the video portion on your TV.
1. Select the desired TV program with the TV set.
2. Tune in the desired FM simulcast TV program on the receiver.
3. Adjust the volume and tone controls as desired.
To watch a video cassette tape on
the VCR connected to VCR 1 jacks.
To watch a video cassette tape on
the VCR connected to VCR 2 jacks.
To watch a VCR connected to
VIDEO INPUT jacks on front panel.
3
To watch the TV picture from a TV
tuner connected to the TV/SAT
jacks.
To watch a LaserDisc.
To listen to a tape on the cassette
deck connected to TAPE 1 jacks.
To listen to a tape on the cassette
deck connected to TAPE 2
MONITOR jacks.
To listen to a record.
To listen to a compact disc.
OPERATING THE TUNER
Program Source
Input selector
VCR 1
VCR 2
VIDEO
TV/SAT
LD
TAPE 1
TAPE 2 MONITOR
PHONO
CD
17
<
>
ARB7050