Dinamica Generale DG500 Panduan Pengguna Cepat - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pengguna Cepat untuk Alat Ukur Dinamica Generale DG500. Dinamica Generale DG500 12 halaman. Feeding monitoring
Halaman Cetak
Use
3) From that moment, the first Unloading Point to
feed will appear on the display. Unload the
TMR until the weight reaches "zero". The scale
will go automatically to the next Unloading
Point.
4) Repeat the procedure for each Unloading Point
until the message "Total Unloaded" will
appear.
SECTION 8 ‐ How to export data
If you are working with the DTM, you need to transfer
data to the software. You need a USB key (or Memory
Card, depending on the type of your indicator)
1) USB key: data are stored in the internal
memory of the indicator.
Plug the USB key to the indicator, press
and select USB KEY.
Press ENTER to confirm data export.
NOTE: you can store up to 700 executions in the
internal memory of DG500. Once memory is full,
exporting is required.
Dinamica generale S.p.A.
3)
1)
1)
4)
1)
5
Rev A1