Dinamica Generale DG500 Panduan Pengguna Cepat - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengguna Cepat untuk Alat Ukur Dinamica Generale DG500. Dinamica Generale DG500 12 halaman. Feeding monitoring
Halaman Cetak
Rev A1
WARNINGS
The power cable has to be connected directly to the battery or to a regulated power source.
If this is not the case DG does not respond to any eventual damage to the indicator.
Disconnect the power cable from the indicator when the battery of the machine is being charged.
If this is not the case DG does not respond to any eventual damage to the indicator.
Disconnect all cables from the indicator before performing welding operations on the machine.
If this is not the case DG does not respond to any eventual damage to the indicator.
For correct functioning, regularly check that the battery tension level remains over 10.5 Volt.
Before cleansing the feed mixer with high‐pressure washer, protect the indicator from possible water
seepage. Furthermore, be very careful to not expose sensors, junction box, acoustic alarm, cables or
other accessories to direct water jets.
If the indicator needs to be cleansed, use a soft, damp, lint‐free cloth. Never use sprays, solvents,
abrasives, sharp or pointed objects that could damage the indicator.
ENVIRONMENT: Disposal Rules
This marking on the product or on its packaging means that this product can
not be disposed with normal household waste.
You are responsible for disposal of this equipement in a correct way and in
according to local regulations.
Electronic equipement, which has become useless, must be collected
separately and sent an eco‐rense.
It is forbidden to abandon in the environment device components or spare
parts.
The manufacturer declines any responsibility for possible damage to
environment, resulting from non‐compliance with the existing legislation
regarding disposal / recovery.
6
Rules
Dinamica generale S.p.A.