Pioneer CLD-901 Panduan Petunjuk Pengoperasian - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pemutar CD Pioneer CLD-901. Pioneer CLD-901 40 halaman. Compact disc/laservision player
Juga untuk Pioneer CLD-901: Panduan Petunjuk Pengoperasian (40 halaman)

Halaman Cetak

PANEL AND REMOTE CONTROL UNIT FACILITIES

[PLAYER FRONT PANEL]

DOOR

When

power

is switched

on, and

EJECT

button

pressed, the door opens downward, and at the same

time, the disc table is expelled outward

a specified

distance.

POWER

button and indicator

LASERVISION

DISC DIGITAL SOUND

SELECTION

(LVP AUDIO) button and AUTO

DIGITAL indicator

When playing back a LaserVision with Digital Sound

Disc, light the AUTO

DIGITAL

indicator with

this

button. (Lights after switching on power.)

In the case of a LaserVision with Digital Sound Disc,

DIGITAL indicator lights automatically, and the digit-

ally recorded sound is output from the CD/LV audio

output terminals on the rear panel.

INDICATOR

SECTION

See next page.

LVP indicator

This indicates whether the pictures on the TV con-

nected to the rear panel VHF OUT terminal, are being

played back from the disc or received from the TV

broadcasting station.

: LaserVision

Disc or Compact

Disc playback

OFF: VHF TV broadcast reception

After switching on power the indicator is ON, indi-

cating selection of disc playback.

CX SYSTEM indicator

(For LaserVision Disc playback only)

Lights when

the CX noise reduction

system

is op-

erating.

EXTENDED

PLAY (CLV) DISC indicator

(For LaserVision Disc playback only)

This lights up when an extended play (CLV) disc is

being played.

LVP AUDIO MONITOR indicators

(For LaserVision Disc playback only)

indicating stereo mode.

REMOTE

SENSOR

and indicator

aim

it at this

remote

sensor.

indicator lights.

These indicate the audio channels being played back.

When power is switched on, both 1/L and 2/R light up,

To operate the player using the remote control unit,

When

the

sensor

receives a command from the remote control unit, the

PHONES jack and LEVEL control

Headphones equipped with a stereo miniature phone

plug can be plugged in here, .for headphones enjoy-

ment of playback sound.

(The sound is the same as

from the CD/LV output terminals.)

Please use headphones with an impedance of 8 Q or

more.

EJECT button

This is used when you want to insert or eject a disc.

When this button is pressed, the door opens, and the

disc table emerges a specified distance.

PLAY button

This button is used:

@ To start playback when the disc is stopped.

@ To return to play mode

when

the player is in a

mode other than play mode (pause mode etc.)

@To

start

chapter

program

playback

(LaserVision

Disc) and track program playback (Compact Disc}.

PLAY indicator

Lights during playback in the play mode (PLAY). Also,

at the

beginning

of playback

or during

a search

operation

etc., it may

take

a short while

for the

command

to be executed after the button has been

pressed.

In such cases the PLAY indicator will flash

until the command is executed (STAND-BY).

REE

SS TTS

SST

PRE EERE

SNPS

a Se

SE S

SETH