Pioneer CLD-901 Manual de Instruções - Página 11
Procurar online ou descarregar pdf Manual de Instruções para Leitor de CD Pioneer CLD-901. Pioneer CLD-901 40 páginas. Compact disc/laservision player
Também para Pioneer CLD-901: Manual de Instruções (40 páginas)
PANEL AND REMOTE CONTROL UNIT FACILITIES
[PLAYER FRONT PANEL]
DOOR
When
power
is switched
on, and
EJECT
button
is
pressed, the door opens downward, and at the same
time, the disc table is expelled outward
a specified
distance.
POWER
button and indicator
LASERVISION
DISC DIGITAL SOUND
SELECTION
(LVP AUDIO) button and AUTO
DIGITAL indicator
When playing back a LaserVision with Digital Sound
Disc, light the AUTO
DIGITAL
indicator with
this
button. (Lights after switching on power.)
In the case of a LaserVision with Digital Sound Disc,
DIGITAL indicator lights automatically, and the digit-
ally recorded sound is output from the CD/LV audio
output terminals on the rear panel.
INDICATOR
SECTION
See next page.
LVP indicator
This indicates whether the pictures on the TV con-
nected to the rear panel VHF OUT terminal, are being
played back from the disc or received from the TV
broadcasting station.
ON
: LaserVision
Disc or Compact
Disc playback
OFF: VHF TV broadcast reception
After switching on power the indicator is ON, indi-
cating selection of disc playback.
CX SYSTEM indicator
(For LaserVision Disc playback only)
Lights when
the CX noise reduction
system
is op-
erating.
EXTENDED
PLAY (CLV) DISC indicator
(For LaserVision Disc playback only)
This lights up when an extended play (CLV) disc is
being played.
LVP AUDIO MONITOR indicators
(For LaserVision Disc playback only)
indicating stereo mode.
REMOTE
SENSOR
and indicator
aim
it at this
remote
sensor.
indicator lights.
These indicate the audio channels being played back.
When power is switched on, both 1/L and 2/R light up,
To operate the player using the remote control unit,
When
the
sensor
receives a command from the remote control unit, the
PHONES jack and LEVEL control
Headphones equipped with a stereo miniature phone
plug can be plugged in here, .for headphones enjoy-
ment of playback sound.
(The sound is the same as
from the CD/LV output terminals.)
Please use headphones with an impedance of 8 Q or
more.
EJECT button
This is used when you want to insert or eject a disc.
When this button is pressed, the door opens, and the
disc table emerges a specified distance.
PLAY button
This button is used:
@ To start playback when the disc is stopped.
@ To return to play mode
when
the player is in a
mode other than play mode (pause mode etc.)
@To
start
chapter
program
playback
(LaserVision
Disc) and track program playback (Compact Disc}.
PLAY indicator
Lights during playback in the play mode (PLAY). Also,
at the
beginning
of playback
or during
a search
operation
etc., it may
take
a short while
for the
command
to be executed after the button has been
pressed.
In such cases the PLAY indicator will flash
until the command is executed (STAND-BY).
11
<VRB1001>
REE
SS TTS
SST
PRE EERE
SNPS
re
UR
NR
a Se
PP
SE
SE S
EY
SETH