Pioneer CLD-901 Panduan Petunjuk Pengoperasian - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pemutar CD Pioneer CLD-901. Pioneer CLD-901 40 halaman. Compact disc/laservision player
Juga untuk Pioneer CLD-901: Panduan Petunjuk Pengoperasian (40 halaman)

Halaman Cetak

REAR PANEL FACILITIES

VHF OUT terminal (75 © F-type jack)

Connect this terminal to your TV set's VHF antenna

terminal.

VHF CHANNEL

SELECTOR

(CH3/CH4)

This switch is for switching the internal VHF converter.

Set to the channel which is not used for TV broad-

casts in your area.

SUBCODE

OUT terminal (round miniature

connector)

This is an output terminal for subcodes

recorded on

Compact disc. (Provided for future applications.)

ANTENNA

terminal (75 ( F-type jack)

Connect the coaxial cable (75 Q) from the VHF TV

antenna to this terminal.

1/O PORT (U-shape 8-pin DIN connector)

This is the input/output port used when

performing

external control of the player.

CONTROL

IN and OUT terminals (miniature

phone jack)

These

terminals

are for communication

of control

codes, when the player is used together with other

Pioneer products with the Pioneer

mark.

VIDEO OUT terminal (RCA jack)

Connect this jack to a TV monitor or a TV set which is

provided with a video input terminal.

LV (ANALOG) AUDIO

OUT terminals

(RCA jacks)

These

terminals

output

the

analog

audio

only of

LaserVision

Discs.

Connect them to the AUX input

terminals etc. of your stereo amplifier.

not connect

these

terminals

to your

amplifier

PHONO

input.

These terminals do not output the digital sound from

Compact

Discs

or LaserVision

with

Digital

Sound

Discs.

CD/LV AUDIO OUT terminals (RCA jacks)

These terminals output Compact

Disc audio, Laser-

Vision Disc audio (analog) and the audio for Laser-

Vision with Digital Sound Discs.

Selection of either

digital or analog sound can be made by operating a

button on the front panel.

Connect

these terminals

to the CD

or AUX

input

terminals etc. of your stereo amplifier.

Do not connect them to your amplifier PHONO input.

(exis (Sica

For the VOLTAGE

-//9|©

sooa tie refer to

o ~~

page

1 .

Power cord

Connect this to a power outlet.

ABOUT THE AUDIO

OUTPUT TERMINALS

This player is equipped

with two

sets of audio

output terminals.

As shown in the table below, the CD/LV terminals

are able to output all the audio signals that can be

played back by the player.

Type of Disc | favback

Output Terminals

Compact

Disc _ | Digital

CD/LV

with Digeal

Digital

|cD/LV<—

Can be selected

Sound

Discs

the LVP AUDIO

button on the

Analog

|cp/Lv<—

front panel.

the defaf

mark)

LV(Analog)

LaserVision Discs

(Discs without

the

difal

mark)

CD/LV

LV(ANALOG)

Analog

For ordinary operation, connect the CD/LV ter-

minals to your amplifier.

The

(ANALOG)

terminals

are

provided

for

developmental use.

They do not need to be used for

ordinary operation.

For details regarding selection of either digital sound

or analog sound when playing back LaserVision with

Digital Sound Discs, please refer to page 19 "AUDIO

REPRODUCTION".

NOTE:

The sound output from the VHF output terminal is analog

sound.

When

a TV set is connected

to the VHF output

terminal, it cannot be used to listen to Compact Disc sound,

or to the digitally recorded sound on LaserVision with Digital

Sound Discs.

SAR

TESA

BEB

EBA

SES

ERT E S T E S

A S R RRO MEN RR

aoa

<7 ET

IEEE

BS SRE

EST

FEI

EST

TET

FINO