Pioneer CLD-901 Руководство по эксплуатации - Страница 7
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для CD-плеер Pioneer CLD-901. Pioneer CLD-901 40 страниц. Compact disc/laservision player
Также для Pioneer CLD-901: Руководство по эксплуатации (40 страниц)
REAR PANEL FACILITIES
VHF OUT terminal (75 © F-type jack)
Connect this terminal to your TV set's VHF antenna
terminal.
VHF CHANNEL
SELECTOR
(CH3/CH4)
This switch is for switching the internal VHF converter.
Set to the channel which is not used for TV broad-
casts in your area.
SUBCODE
OUT terminal (round miniature
connector)
This is an output terminal for subcodes
recorded on
Compact disc. (Provided for future applications.)
ANTENNA
terminal (75 ( F-type jack)
Connect the coaxial cable (75 Q) from the VHF TV
antenna to this terminal.
A
1/O PORT (U-shape 8-pin DIN connector)
This is the input/output port used when
performing
external control of the player.
CONTROL
IN and OUT terminals (miniature
phone jack)
These
terminals
are for communication
of control
codes, when the player is used together with other
Pioneer products with the Pioneer
mark.
VIDEO OUT terminal (RCA jack)
Connect this jack to a TV monitor or a TV set which is
provided with a video input terminal.
LV (ANALOG) AUDIO
OUT terminals
(RCA jacks)
These
terminals
output
the
analog
audio
only of
LaserVision
Discs.
Connect them to the AUX input
terminals etc. of your stereo amplifier.
Do
not connect
these
terminals
to your
amplifier
PHONO
input.
These terminals do not output the digital sound from
Compact
Discs
or LaserVision
with
Digital
Sound
Discs.
CD/LV AUDIO OUT terminals (RCA jacks)
These terminals output Compact
Disc audio, Laser-
Vision Disc audio (analog) and the audio for Laser-
Vision with Digital Sound Discs.
Selection of either
digital or analog sound can be made by operating a
button on the front panel.
Connect
these terminals
to the CD
or AUX
input
terminals etc. of your stereo amplifier.
Do not connect them to your amplifier PHONO input.
(exis (Sica
For the VOLTAGE
-//9|©
© ;
sooa tie refer to
o ~~
i
page
1 .
Power cord
Connect this to a power outlet.
ABOUT THE AUDIO
OUTPUT TERMINALS
This player is equipped
with two
sets of audio
output terminals.
As shown in the table below, the CD/LV terminals
are able to output all the audio signals that can be
played back by the player.
Type of Disc | favback
Output Terminals
Compact
Disc _ | Digital
CD/LV
with Digeal
Digital
|cD/LV<—
Can be selected
Sound
Discs
aS
the LVP AUDIO
i
i
button on the
ae
2
Analog
|cp/Lv<—
front panel.
the defaf
mark)
LV(Analog)
LaserVision Discs
(Discs without
the
difal
mark)
CD/LV
LV(ANALOG)
Analog
For ordinary operation, connect the CD/LV ter-
minals to your amplifier.
The
LV
(ANALOG)
terminals
are
provided
for
developmental use.
They do not need to be used for
ordinary operation.
For details regarding selection of either digital sound
or analog sound when playing back LaserVision with
Digital Sound Discs, please refer to page 19 "AUDIO
REPRODUCTION".
NOTE:
The sound output from the VHF output terminal is analog
sound.
When
a TV set is connected
to the VHF output
terminal, it cannot be used to listen to Compact Disc sound,
or to the digitally recorded sound on LaserVision with Digital
Sound Discs.
7
<VRB1001>
SAR
TESA
BEB
EBA
SES
ERT E S T E S
A S R RRO MEN RR
aoa
<7 ET
IEEE
BS SRE
EST
FEI
TE
EST
EI
TET
EE
FINO
ET