Pioneer DEH-6400BT Panduan Pengoperasian - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pemutar CD Pioneer DEH-6400BT. Pioneer DEH-6400BT 36 halaman. Cd rds receiver
Juga untuk Pioneer DEH-6400BT: Panduan Pemilik (25 halaman), Panduan Memulai Cepat (8 halaman)
Halaman Cetak
Section
02
Operating this unit
1
After installation of this unit, turn the
ignition switch to ON.
SET UP appears.
2
Turn M.C. to switch to YES.
# If you do not operate for 30 seconds, the set
up menu will not be displayed.
# If you prefer not to set up at this time, turn
M.C. to switch to NO.
If you select NO, you cannot set up in the set up
menu.
3
Press M.C. to select.
4
Perform the following procedures to
set the menu.
To proceed to the next menu option, you need
to confirm your selection.
Language select (multi-language)
1 Turn M.C. to select the desired language.
English—Français—Italiano—Español—
Deutsch—Nederlands—РУССКИЙ
2 Press M.C. to confirm the selection.
Calendar (setting the date)
1 Turn M.C. to change the year.
2 Press M.C. to select day.
3 Turn M.C. to change the day.
4 Press M.C. to select month.
5 Turn M.C. to change the month.
6 Press M.C. to confirm the selection.
Clock (setting the clock)
1 Turn M.C. to adjust hour.
2 Press M.C. to select minute.
3 Turn M.C. to adjust minute.
4 Press M.C. to confirm the selection.
FM step (FM tuning step)
1 Turn M.C. to select the FM tuning step.
50kHz (50 kHz)—100kHz (100 kHz)
2 Press M.C. to confirm the selection.
Contrast (display contrast setting)
1 Turn M.C. to adjust the contrast level.
0 to 15 is displayed as the level is increased or de-
creased.
2 Press M.C. to confirm the selection.
6
En
Demonstration (demo display setting)
1 Turn M.C. to set the demo display to off.
2 Press M.C. to confirm the selection.
Quit appears.
5
To finish your settings, turn M.C. to se-
lect YES.
# If you prefer to change your setting again, turn
M.C. to switch to NO.
6
Press M.C. to select.
Notes
! Because demonstration mode is the function
for displaying at stores, do not use this func-
tion while driving.
! You can set up the menu options in the initial
settings. For details about the settings, refer to
Initial settings on page 20.
! You can cancel set up menu by pressing SRC/
OFF.
Basic operations
Important
! Handle gently when removing or attaching
the front panel.
! Avoid subjecting the front panel to excessive
shock.
! Keep the front panel out of direct sunlight and
high temperatures.
! To avoid damaging the device or vehicle inter-
ior, remove any cables and devices attached
to the front panel before detaching it.