Pioneer DEH-6400BT Panduan Pengoperasian - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pemutar CD Pioneer DEH-6400BT. Pioneer DEH-6400BT 36 halaman. Cd rds receiver
Juga untuk Pioneer DEH-6400BT: Panduan Pemilik (25 halaman), Panduan Memulai Cepat (8 halaman)
Operating this unit
Removing the front panel to protect your unit from
theft
1 Press the detach button to release the front
panel.
2 Push the front panel upward (M) and then pull it
toward (N) you.
3 Always keep the detached front panel in a protec-
tion device such as a protection case.
Re-attaching the front panel
1 Slide the front panel to the left.
Make sure to insert the tabs on the left side of the
head unit into the slots on the front panel.
2 Press the right side of the front panel until it is
firmly seated.
If you cannot attach the front panel to the head
unit successfully, make sure that you are placing
the front panel onto the head unit correctly. For-
cing the front panel into place may result in da-
mage to the front panel or head unit.
Turning the unit on
1 Press SRC/OFF to turn the unit on.
Turning the unit off
1 Press and hold SRC/OFF until the unit turns off.
Selecting a source
1 Press SRC/OFF to cycle between:
TUNER (tuner)—CD (CD player)—USB (USB)/
iPod (iPod)—SD (SD memory card)—AUX (AUX)
—BT Audio (BT audio)
Adjusting the volume
1 Turn M.C. to adjust the volume.
CAUTION
For safety reasons, park your vehicle when remov-
ing the front panel.
Notes
! When this unit's blue/white lead is connected
to the vehicle's auto-antenna relay control
terminal, the vehicle's antenna extends when
this unit's source is turned on. To retract the
antenna, turn the source off.
! If plug and play is on and either an iPhone or
iPod touch is connected, it may take time for
your source to switch. Refer to
USB plug&play (plug and play) on page 20.
Menu operations identical
for function settings/audio
adjustments/initial
settings/lists
Returning to the previous display
Returning to the previous list/category. (the folder/ca-
tegory one level higher.)
1 Press
/DISP.
Turning the demo display on or off
1 Press and hold
/DISP.
Returning to the ordinary display
Canceling the initial setting menu
1 Press BAND/ .
Returning to the ordinary display from the list/cate-
gory
1 Press BAND/ .
Selecting a function or list
1 Turn M.C. or LEVER.
! In this manual, "Turn M.C." is used to describe
the operation used to select a function or list.
Section
02
7
En