Pioneer DVD-V7200 Manual Jaringan - Halaman 11

Jelajahi secara online atau unduh pdf Manual Jaringan untuk Pemutar DVD Pioneer DVD-V7200. Pioneer DVD-V7200 24 halaman. Industrial dvd-video player
Juga untuk Pioneer DVD-V7200: Panduan Petunjuk Pengoperasian (46 halaman), Informasi Peningkatan (1 halaman), Daftar Perintah (3 halaman), Manual Perangkat Lunak (1 halaman), Buletin (1 halaman), Spesifikasi (3 halaman)

3.3

Command and Status

The computer transmits a command to the DVD-V7200 and the player

responds with the message, 'execution complete'.

Example

COMPUTER

(1) "Search to Frame 1000"

(4) "Play to Frame 2000"

NOTE: The length of a command string is limited to 32 characters. Please

refer to the COMMAND STRUCTURE segment for additional information.

When using a computer to control the DVD-V7200 player, follow the

command protocols listed below:

ASCII character codes are used for the actual commands and status

response

Command mnemonic is expressed as two (2) ASCII characters

Uppercase letters are recommended; however, usually there are no

distinctions between the use of uppercase or lowercase letters

Some commands require an argument, (e.g. chapter number or

speed)

Use a command as the terminator of the argument

The player executes a command as soon as the carriage return <CR> is

received. The <CR> acts as the command line terminator.

Example

CH<CR>

10SE<CR>

The player has a command buffer, which stores a command string of up to

32 characters in length.

Example

10SE 20PL<CR>

The command string enters into the buffer with the left character and

continues sequentially from left to right. When the

commands are executed sequentially beginning with the first command in

the buffer. In the example above, the first command is 10SE.

Set chapter for address mode

Search to chapter 10

Search to chapter 10 then play to 20

- 5 -

DVD-V7200 Upload/Download

DVD-V7200

(2) Search Execution

(3) Complete

(5) Play Execution

(6) Complete

is entered, the

<CR>