Dinel CLS-23 Buku Petunjuk - Halaman 3
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Aksesori Dinel CLS-23. Dinel CLS-23 18 halaman. Capacitive level sesors
Juga untuk Dinel CLS-23: Manual (20 halaman)
Halaman Cetak
U
sed symbols
To ensure maimum safety of control processes we have dened the following safety instructions
and information. ach instruction is labeled with the appropriate pictogram.
A
This symbol informs you about particularly important instructions for installation and op-
eration of euipment or dangerous situations that may occur during the installation and
operation. ot observing these instructions may cause disturbance damage or destruction
of euipment or may cause inury.
I
This symbol indicates particularly important characteristics of the device.
N
This symbol indicates helpful additional information.
1 . s
a et
All operations described in this instruction manual have to be carried out by trained
personnel or by an accredited person only. Installation, commissioning, operation and
maintenance of the capacitive level sensors has to be carried out in accordance with this
instruction manual; the provisions of regulations in force regarding the installation of
electrical equipment have to be adhered to.
Improper use, installation or set-up of the sensor can lead to crashes in the application,
(overlling of the tank or damage of system components).
The manufacturer is not responsible for improper use, loss of work caused by either
direct or indirect damage, and for expenses incurred at the time of installation or during
the period of use of the level sensors.
2 . P
,
acking
transPortation and storage
uipment is paced in a polythene bag and the whole consignment is placed in a card-
board bo. The cardboard bo is suitably lled to prevent mechanical damage during transport. et
the device paced up till the use to prevent possible damage.
Transport to the customer is realied by forwarding company. pon receipt please chec whether
the shipment is complete and corresponds to the etent of the order or whether during the transport
did not occurred the damage of the pacaging or the euipment. The device apparently damaged
during transport do not use and contact the manufacturer to resolve the situation.
f the device is transported further then only wrapped in the original pacaging and protected
against shocs and weather. tore the device in its original pacaging in a dry place sheltered from
the weather with humidity up to without the effects of chemically active substances. torage
temperature range is from to .
Sensor variants CLS–23_–20 a 21 with the electrodes longer than 100 mm are tted with
protective caps at the ends of the electrodes to prevent damage of the electrodes, box
rupture or injury of handling persons. Before commissioning, remove the caps.
4
CLS 23
Dinel