Firenzo HASTINGS 4.8KW Petunjuk Untuk Manual Instalasi - Halaman 18
Jelajahi secara online atau unduh pdf Petunjuk Untuk Manual Instalasi untuk Kompor kayu Firenzo HASTINGS 4.8KW. Firenzo HASTINGS 4.8KW 19 halaman. 4.8kw free standing wood burning stove
Halaman Cetak18
Push the middle baffle brick up and slide it left or right over the corresponding brick. This will leave an opening
big enough for the chimney brush to pass between the other two bricks. Take care when lifting it from the
anchoring pin.
To remove the bricks from the stove turn the moved baffle brick sideways (east/west) and tipping it up, slide it
down through the space it created.
Only remove the baffle bricks when the stove is cold.
When the baffle bricks are removed, there is access to clean the flue chamber above the baffle bricks. Each of
the three baffle bricks is held in place by an upright pin positioned on the baffle cradle at the back of the inside of
the fire box.
Clean the baffle bricks before replacing, and take care that they are properly put in place ensuring they are
placed onto the retaining pins on the rear baffle cradle and resting on the air tube toward the front of the fire box.
The chimney sweep must remove the soot in the stove, in addition to sweeping the chimney and cleaning the flue
pipe. The number of annual sweepings/cleanings of the stove should be determined in consultation with your
chimney sweep.
9.3.1 Ash
As noted above, there should be a layer of approx. 20mm of ashes in the bottom of the combustion chamber in
order to achieve a high combustion temperature. If the layer of ash is too thick, it can be scooped into an ash
bucket and removed.
In most cases, the ash will need to be taken away by the waste disposal company. Because embers may be
concealed in the ash pan for several days, it may be necessary to store the ash in a container made of non-
flammable material before pouring it into a rubbish bag.
Ash from a wood-burning stove will not be of any benefit to your garden as fertiliser. If you have burned colour
brochures, or painted or treated wood, etc., in the stove, the resulting ash must not be poured onto soil as it may
contain heavy metals.
10.0 Warranty
Firenzo fires are manufactured in New Zealand, using the highest quality materials, workmanship and the latest
manufacturing techniques, which is why a full 10 year firebox warranty and 1 year parts warranty is offered.
Firenzo Warranty
(UK consumer laws apply to this warranty)
Firenzo Woodfires UK Limited warrants the steel firebox and castings against defective materials and
workmanship which would render it unfit for normal domestic use, from the date of purchase by the original
consumer, for a period of 10 years.
Components including coatings, air tubes, door handles and components, door seals, glass, trim, baffles & bricks
are warranted for a period of 1 year from the date of original purchase for domestic use against defective
materials and workmanship.
It is recommended, but not a condition of this warranty, that a full service/inspection of the Firenzo stove fire be
carried out at the end of each winter season.
10.1 Warranty conditions:
• The Firenzo stove must be installed, operated and maintained strictly in accordance with the building code and
this user guide.
• The Firenzo stove must be installed and used in a domestic application.
• The Firenzo stove must be installed by an authorised installer.
• This warranty covers appliance like for like replacement or repair at the manufacturer's discretion but excludes
freight, travel, installation, labour and/or any other associated costs.
• Firenzo UK Limited or their agents are not liable for any loss or expense direct or indirect arising from the failure
of any part or operation of the appliance.
HI-2014-06-09