Whirlpool 27" W10563341A Panduan Petunjuk Instalasi - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Pengering Whirlpool 27" W10563341A. Whirlpool 27" W10563341A 20 halaman. Electric dryer 27" wide models

Halaman Cetak

1. Troubleshooting

Clamps:

Use clamps to seal all joints.

■

Exhaust vent must not be connected or secured with screws

■

or other fastening devices that extend into interior of duct

and catch lint. Do not use duct tape.

See "Venting Kits" for more information.

Plan Vent System

Recommended exhaust installations

Typical installations vent the dryer from the rear of the dryer.

Other installations are possible.

A. Dryer

F. Rigid metal or flexible metal vent

B. Elbow

G. Vent length necessary to connect elbows

C. Wall

H. Exhaust outlet

D. Exhaust hood

I. Optional side exhaust outlet

E. Clamps

Optional exhaust installations:

Exhaust can be converted out the right side, left side, or through

the bottom (4-way vent kit). Each kit includes step-by-step

instructions. For ordering information, see "Venting Kits".

A. Standard rear offset exhaust installation

B. Left or right side exhaust installation

C. Bottom exhaust installation

Alternate installations for close clearances

Venting systems come in many varieties. Select the type best

for your installation. Two close-clearance installations are shown.

Refer to the manufacturer's instructions.

Over-The-Top installation (also available with one offset elbow)

Periscope installation

NOTE: The following kits for close clearance alternate

installations are available for purchase.