Whirlpool Cabrio,- WED7300X Panduan Penggunaan dan Perawatan - Halaman 6

Halaman Cetak

Whirlpool Cabrio,- WED7300X Panduan Penggunaan dan Perawatan

Drying and Cycle Tips

Select the correct cycle and dryness level or temperature for

your load. If an Automatic Cycle is running, the display shows

the estimated cycle time when your dryer is automatically

sensing the dryness level of your load. If a Manual Cycle is

running, the display shows the exact number of minutes

remaining in the cycle.

Cool Down tumbles the load without heat during the last few

minutes of all cycles. Cool Down makes the loads easier to handle

and reduces wrinkling. The length of the Cool Down depends on

the load size and dryness level.

Drying tips

■

Follow care label directions when they are available.

■

If desired, add a fabric softener sheet. Follow package

instructions.

■

To reduce wrinkling, remove the load from the dryer as soon

as tumbling stops. This is especially important for permanent

press, knits, and synthetic fabrics.

■

Avoid drying heavy work clothes together with lighter fabrics.

This could cause overdrying of lighter fabrics and lead to

increased shrinkage or wrinkling.

Cycle tips

■

Dry most loads using the preset cycle settings.

■

Refer to the Automatic or Manual Cycle Settings chart (in the

"Cycles" section) for a guide to drying various loads.

■

Drying temperature and dryness level are preset when

you choose an Automatic Cycle. You can select a

different dryness level, depending on your load, by

pressing Dryness Level and choosing More, Normal,

Less, or Damp.

NOTE: Time adjust and changing Temperature setting is

not available with Automatic Cycles. You cannot use the

Time Adjust and you cannot choose a Temperature with

the Automatic Cycles.

■

If you wish to adjust the cycle length of a Manual Cycle,

press the Time Adjust up or down arrows. Adjust the

temperature of a Manual Cycle by pressing Temp until the

desired temperature is selected.

NOTE: You cannot choose a dryness level with Manual

Cycles. Changing the Dryness Level setting is not

available with Manual Cycles.

Select the drying cycle that matches the type of load you

are drying. See the Automatic, Steam, or Manual Cycle

Settings Charts.

Steam models

Cycles

Non-Steam models

Cycle Control knob

Automatic Cycles

Automatic Cycles allow you to match the cycle to the load you are

drying. See the following Automatic Preset Cycle Settings chart.

Each cycle dries certain fabrics at the recommended temperature.

A sensor detects the moisture in the load and automatically

adjusts the drying time for optimal drying.

NOTE: Not all cycles are available on all models.

Automatic Preset Cycle Settings

Automatic Cycles

Load Type

HEAVY DUTY

Heavyweight mixed loads, cottons,

and jeans

BULKY ITEMS

Blankets and comforters

NORMAL

Sturdy fabrics such as corduroys

and work clothes

ECO NORMAL

Designed for average size loads of

medium weight items

CASUAL

Perm Press

No-iron fabrics, such as sports shirts,

casual business clothes, permanent

press, and synthetics

TOWELS

Cotton

Towels

DELICATE

Lingerie, blouses, or washable

knit fabrics

Temperature

High

Medium

Low

High

Extra-Low