Whirlpool Cabrio,- WED7300X Panduan Dimensi

Jelajahi secara online atau unduh pdf Panduan Dimensi untuk Pengering Whirlpool Cabrio,- WED7300X. Whirlpool Cabrio,- WED7300X 2 halaman. Top-loading high efficiency low-water washer
Juga untuk Whirlpool Cabrio,- WED7300X: Panduan Penggunaan dan Perawatan (40 halaman), Panduan Penggunaan dan Perawatan (40 halaman), Panduan Penggunaan dan Perawatan (36 halaman), Panduan Penggunaan dan Perawatan (32 halaman), Instal Manual (16 halaman), Panduan Penggunaan dan Perawatan (40 halaman), Panduan Penggunaan dan Perawatan (40 halaman), Dimensi dan Informasi Instalasi (1 halaman), Panduan Penggunaan dan Perawatan (40 halaman), Panduan Penggunaan & Perawatan (48 halaman), Panduan Penggunaan dan Perawatan (40 halaman), Panduan Penggunaan dan Perawatan (40 halaman), Panduan Penggunaan dan Perawatan (40 halaman), Panduan Penggunaan & Perawatan (44 halaman), Panduan Penggunaan & Perawatan (19 halaman), Penggunaan & Perawatan Gude (44 halaman), Panduan Penggunaan & Perawatan (44 halaman)

Whirlpool Cabrio,- WED7300X Panduan Dimensi
PRODUCT MODEL NUMBERS
WED7300X, WED7400X,
WED7600X, WED7800X
Dryer with Extended back view:
Bottom view:
NOTE: Most installations require a minimum of 5" (127 mm)
clearance behind dryer for exhaust vent with elbow. See
"Venting Requirements."
Spacing for recessed area or closet installation
All dimensions show recommended spacing allowed, with
tested spacing of 0" (0 mm) clearance on sides and rear.
Additional spacing should be considered for ease of
installation and servicing.
Additional clearances might be required for wall, door,
and floor moldings.
Additional spacing should be considered on all sides
of the dryer to reduce noise transfer.
For closet installation, with a door, minimum ventilation
openings in the top and bottom of the door are required.
Louvered doors with equivalent ventilitation openings are
acceptable.
Companion appliance spacing should also be considered.

Electric Dryer

Dryer with Flat back view:
Recommended Installation Spacing:
Back view:
W10388775
06/2011