Whirlpool Cabrio,- WED7300X Manual de dimensões

PRODUCT MODEL NUMBERS

WED7300X, WED7400X,

WED7600X, WED7800X

Dryer with Extended back view:

Bottom view:

NOTE: Most installations require a minimum of 5" (127 mm)

clearance behind dryer for exhaust vent with elbow. See

"Venting Requirements."

Spacing for recessed area or closet installation

All dimensions show recommended spacing allowed, with

tested spacing of 0" (0 mm) clearance on sides and rear.

Additional spacing should be considered for ease of

■

installation and servicing.

Additional clearances might be required for wall, door,

■

and floor moldings.

Additional spacing should be considered on all sides

■

of the dryer to reduce noise transfer.

For closet installation, with a door, minimum ventilation

■

openings in the top and bottom of the door are required.

Louvered doors with equivalent ventilitation openings are

acceptable.

Companion appliance spacing should also be considered.

■

Electric Dryer

Dryer with Flat back view:

Recommended Installation Spacing:

Back view:

W10388775

06/2011