Whirlpool Cabrio,- WED7300X Panduan Penggunaan & Perawatan - Halaman 6

Halaman Cetak

Whirlpool Cabrio,- WED7300X Panduan Penggunaan & Perawatan

O OPTIONS

You may addorremove options f oreach cycle. Notall

options c anbeused withallcycles, andsome arepreset

towork withcertain c ycles.

DELAY START

Touch Delay Start to delay the start of the wash cycle up

to 12 hours "12H'. Touch Delay Start until a "OH" appears

in the status display to turn off, or touch POWER.

END BEEP

End Beep signals that a cycle has completed.

STEAM CLEAN (depending on model)

The Steam Clean option adds additional soak and wash

time to many cycles to help remove tough stains, as well

as a steam boost for added cleaning power. Steam Clean

uses a heater within the washer to maintain the selected

temperature setting throughout the wash period. Steam

Clean may be selected as an option with other cycles.

DEEP CLEAN (depending

on model)

This option provides enhanced cleaning action for tough

stains. It wilt add additional agitation and soak time to

the cycle.

CLEAN BOOST (depending

on model)

This option provides enhanced cleaning action for tough

stains. It will add additional agitation and soak time to

the cycle.

UTILITY TOOLS

Clean Washer

Use this every 30 washes to keep the inside of your

washer fresh and clean. This cycle uses a higher water

bevel. Use with affresh ® Washer Cleaner tablet or liquid

chlorine bleach to thoroughly clean the inside of your

washer. This cycle should not be interrupted. See

"Washer Care."

IMPORTANT:

Do not place garments or other items

in the washer during the Clean Washer cycle. Use this

cycle with an empty wash tub.

Rinse & Spin

Combines a rinse and high speed spin for loads

requiring an additional rinse cycle or to complete

a load after power interruption.

Also use for loads

that require rinsing only.

EXTRA RINSE

This option can be used to automatically

add a second

rinse to most cycles.

PRESOAK

Use this option to add an extra soak period to any cycle

to help loosen tough stains. The washer wilt fill and then

pause to soak, and then begin the selected cycle.

CYCLE

MODiFiERS

When you select a cycle, its default settings or the previous

cycle selection used will light up.

TEMPERATURE

Temperature Control senses and maintains uniform

water temperatures

by regulating incoming hot and

cold water.

Select a wash temperature

based on the type of fabric

and soils being washed. For best results and following

the garment label instructions,

use the warmest wash

water safe for your fabric.

• On some models and cycles, warm and hot water wilt

be cooler than what your previous washer provided.

Even for cold wash settings, some warm water

may be added to the washer to maintain a minimum

temperature.

SOIL LEVEL

Soil Level (wash time) is preset for each wash cycle.

As you touch the Soil Level pad, the cycle time (minutes)

wilt increase or decrease in the Estimated Time Remaining

display and a different wash time will appear.

Select the most suitable setting for your load. For heavily

soiled items, select Heavy Soil Level for more wash

time. For lightly soiled items, select Light Soil Level for

less wash time. Lighter soil level setting will help reduce

tangling and wrinkling.

SPIN SPEED

This washer automatically

selects the spin speed

based on the cycle selected. The preset speeds can be

changed. Not all spin speeds are available with all cycles.

Faster spin speeds mean shorter dry times, but may

increase wrinkling in your load.

Slower spin speeds mean less wrinkling, but wilt leave

your load more damp.

LID

The Lid Lock (_

Lid )

indicator lights up

when the lid is locked and cannot be

f_.o_

opened. If you need to open the

lid,

HoldtoStart

touch and hold START/PAUSE. The lid

will unlock once the washer movement

®ud

has stopped. This may take several

¢ Lid

minutes if the toad was spinning at

high speed. Touch and hold START/PAUSE

button again to restart the cycle.