Clare Controls ClareVision Plus Panduan Memulai Cepat - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Kamera Keamanan Clare Controls ClareVision Plus. Clare Controls ClareVision Plus 9 halaman. Ip cctv cameras
Juga untuk Clare Controls ClareVision Plus: Panduan Memulai Cepat (9 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (6 halaman), Manual (9 halaman)
Halaman Cetak
Included
(contents vary per NVR)
• NVR
• Power cord
• Optical mouse
• Remote control (if applicable)
• SATA hard drive (pre-installed)
• Small Phillips head screws (if applicable)
• Drill template (if applicable)
Search Active Device Protocol (SADP) Tool
Using your computer, browse to the below address and download the SADP tool.
Note:
The SADP tool is only available on Windows.
www.clarecontrols.com/dealer/clarevisionplus-resources/
Troubleshooting
Factory Reset
To factory default the NVR: login to the NVR, click on Configuration, click on
Maintenance, and then select Factory Defaults. This resets the NVR to default
factory settings.
Installation Options
Select an installation option.
Installation Option 1: Web Browser
Note:
You must have access to a computer and the SADP Tool or IP scanner.
To connect and configure the NVR:
1. Find the NVR's IP address using the SADP tool, IP scanner, or in the
ClareVision Plus app under Online Devices.
2. Using your computer, browse to the NVR's IP address to log in. When
prompted, enter the new password and password confirmation.
3. Setup security.
a. Answer security questions (share these questions and answers with your
client).
DOC ID - 1539 • Rev 09
2 / 9