Clare Controls ClareVision Plus 빠른 시작 매뉴얼 - 페이지 2
{카테고리_이름} Clare Controls ClareVision Plus에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clare Controls ClareVision Plus 9 페이지. Ip cctv cameras
Clare Controls ClareVision Plus에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (9 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (6 페이지), 매뉴얼 (9 페이지)
페이지 인쇄
Included
(contents vary per NVR)
• NVR
• Power cord
• Optical mouse
• Remote control (if applicable)
• SATA hard drive (pre-installed)
• Small Phillips head screws (if applicable)
• Drill template (if applicable)
Search Active Device Protocol (SADP) Tool
Using your computer, browse to the below address and download the SADP tool.
Note:
The SADP tool is only available on Windows.
www.clarecontrols.com/dealer/clarevisionplus-resources/
Troubleshooting
Factory Reset
To factory default the NVR: login to the NVR, click on Configuration, click on
Maintenance, and then select Factory Defaults. This resets the NVR to default
factory settings.
Installation Options
Select an installation option.
Installation Option 1: Web Browser
Note:
You must have access to a computer and the SADP Tool or IP scanner.
To connect and configure the NVR:
1. Find the NVR's IP address using the SADP tool, IP scanner, or in the
ClareVision Plus app under Online Devices.
2. Using your computer, browse to the NVR's IP address to log in. When
prompted, enter the new password and password confirmation.
3. Setup security.
a. Answer security questions (share these questions and answers with your
client).
DOC ID - 1539 • Rev 09
2 / 9