Whirlpool UXT4030AD Petunjuk Pemasangan Dan Panduan Penggunaan & Perawatan - Halaman 5

Jelajahi secara online atau unduh pdf Petunjuk Pemasangan Dan Panduan Penggunaan & Perawatan untuk Kap Ventilasi Whirlpool UXT4030AD. Whirlpool UXT4030AD 24 halaman. 30" and 36" (76.2 and 91.4 cm) range hood
Juga untuk Whirlpool UXT4030AD: Petunjuk Pemasangan Dan Panduan Penggunaan & Perawatan (28 halaman), Petunjuk Pemasangan Dan Panduan Penggunaan & Perawatan (24 halaman), Petunjuk Pemasangan Dan Panduan Penggunaan & Perawatan (24 halaman), Petunjuk Pemasangan Dan Panduan Penggunaan & Perawatan (24 halaman)

INSTALLATION

1. Disconnect

power

Electrical

Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

2. Mark Hole Locations

Align the exterior edge of the mounting brackets with the exterior

edges of the upper cabinet.

IMPORTANT: The brackets should touch the upper cabinet.

With a pencil, mark the upper holes on the brackets.

INSTRUCTIONS

3. Install Brackets

•

Using a #2 Phillips screwdriver, install the drywall anchors.

•

Using #8-18 x 1" (4.2 x 25 mm) flat-head #2 Phillips screws,

install the mounting brackets using the upper holes.

NOTE: For installations to a surface other than drywall, it is

recommended

that a qualified contractor determine the

anchoring method.

4. Prepare

Range

Hood

•

Set the range hood on its back on a covered surface.

•

Using a #2 Phillips screwdriver, remove the electrical box

cover.

Using a flat-blade screwdriver, remove the appropriate

power

supply knockout.