AlcoSense PRODIGY Panduan Pengguna - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Uji AlcoSense PRODIGY. AlcoSense PRODIGY 18 halaman.
FIElDS
Fields selected under Field settings will be printed on the
receipt. Data entered at time of test will print on receipt.
bATTERY lIFE
High Capacity Lithium rechargeable batteries can print
around 30 meters of paper.
bATTERY ChARgER
Use only the supplied charger to charge the printer
battery.
Caution: Use only the lithium battery provided.
STANDARD ThERMAl PAPER SIZE
6cm X 1000cm
A wireless thermal printer can be used with the device.
INSERT / REPlACE PAPER
Pull the handle. When inserting a new roll of paper, make
sure glossy side of paper is kept close to indentation.
NOTE: If nothing can be printed, change the side of the
paper and try again.
TROUBLESHOOTING
'CAlIbRATION NEEDED' WARNINg
When the unit starts up and shows the "Calibration Needed"
warning and alarm, it means that the unit has passed its
calibration due date. You can touch the screen to continue
using the unit, however we strongly recommend that you send
this back to us for calibration.
bATTERY lIFE TOO ShORT
Use only alkaline batteries, or if using rechargeable batteries,
use either NiMH or rechargheable alkaline batteries.
TOUCh SCREEN NOT RESPONDINg
If the touch screen is not sensitive enough, please calibrate the
screen. Press and hold the On/Off button (right button) and then
press the Function button (left button) immediately. Follow the
on-screen instructions to calibrate the touchscreen.
13