AlcoSense PRODIGY Kullanıcı Kılavuzu - Sayfa 13

Test Ekipmanları AlcoSense PRODIGY için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AlcoSense PRODIGY 18 sayfaları.

FIElDS

Fields selected under Field settings will be printed on the

receipt. Data entered at time of test will print on receipt.

bATTERY lIFE

High Capacity Lithium rechargeable batteries can print

around 30 meters of paper.

bATTERY ChARgER

Use only the supplied charger to charge the printer

battery.

Caution: Use only the lithium battery provided.

STANDARD ThERMAl PAPER SIZE

6cm X 1000cm

A wireless thermal printer can be used with the device.

INSERT / REPlACE PAPER

Pull the handle. When inserting a new roll of paper, make

sure glossy side of paper is kept close to indentation.

NOTE: If nothing can be printed, change the side of the

paper and try again.

TROUBLESHOOTING

'CAlIbRATION NEEDED' WARNINg

When the unit starts up and shows the "Calibration Needed"

warning and alarm, it means that the unit has passed its

calibration due date. You can touch the screen to continue

using the unit, however we strongly recommend that you send

this back to us for calibration.

bATTERY lIFE TOO ShORT

Use only alkaline batteries, or if using rechargeable batteries,

use either NiMH or rechargheable alkaline batteries.

TOUCh SCREEN NOT RESPONDINg

If the touch screen is not sensitive enough, please calibrate the

screen. Press and hold the On/Off button (right button) and then

press the Function button (left button) immediately. Follow the

on-screen instructions to calibrate the touchscreen.