Xerox 6180DN - Phaser Color Laser Printer Manual - Halaman 29

Jelajahi secara online atau unduh pdf Manual untuk Printer Xerox 6180DN - Phaser Color Laser Printer. Xerox 6180DN - Phaser Color Laser Printer 34 halaman. 26-ppm monochrome/ 20-ppm color
Juga untuk Xerox 6180DN - Phaser Color Laser Printer: Panduan Instalasi (34 halaman), Lembar Spesifikasi (2 halaman), Panduan Pengguna (32 halaman), Panduan Pengguna (28 halaman), Instal Manual (2 halaman), Manual Keamanan (38 halaman), Catatan Rilis (2 halaman), Instal Manual (2 halaman), Panduan Memulai (37 halaman), Manual (34 halaman), Panduan Memulai (34 halaman), Panduan Pengguna (32 halaman), Panduan Instalasi dan Pengoperasian (8 halaman), Spesifikasi (4 halaman), Manual (28 halaman)

Xerox 6180DN - Phaser Color Laser Printer Manual

New Features And Updates For EPS Products Only

LCDS Tape Client updates

LCDS Accounting page update

DocuSP 4.1 to 4.2 Differences Document
DocuSP 4.2 enables users to select and print single or
multiple LCDS reports from the DocuSP Tape Client
GUI. If multiple reports are desired, the reports must be
specified in ascending order with a position relative to
the beginning of the container.
The user can specify a range of reports from a file for
printing. The report range applies to the first file in the
file range only, and uses the same format as the file
range. The maximum length for the report range is set
to 120 characters.
The Tape Client GUI is modified to support Reporting.
The File Ranges panel is renamed to Tape File
Selections. Within this panel, a new radio button for
Reports and a text field for Report Ranges are added.
GUI behaviors
♦ Selecting All: the Tape Client GUI prints all files on
the tape as in DocuSP 4.1.
♦ Selecting Range: the Tape Client GUI prints a
range of files on the tape as in DocuSP 4.1.
♦ Selecting Reports: The Tape Client GUI prints
reports from the first file specified in the Files text
field. If there is more than one entry in the Range
field, the subsequent entries are ignored.
DocuSP 4.2 introduces an update to the LCDS
accounting page. Prior to 4.2, only the initial JDL/JDE
was printed on the LCDS accounting page and saved
in the DocuSP accounting log. In 4.2, the Initial
JDL/JDE remains the same; however, the Current (or
Last) JDL/JDE is also printed on the LCDS accounting
page and saved in the DocuSP accounting log.
25