Xerox Wide Format 7742 Panduan Pengguna - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Printer Xerox Wide Format 7742. Xerox Wide Format 7742 24 halaman. Scan solution

Halaman Cetak

Problem Solving

Error

Jams occur frequently

Status indicator light is lit.

Problems during Scanning

The following helps you solve problems encountered during scanning. Also refer to the

software documentation.

Table 7. Problems during Scanning

Symptoms

Document doesn t feed into

the scanner.

Document doesn t feed into

the scanner.

The scanned image is dirty.

The scanned image has

black lines.

The scanned images are

skewed.

3-2

Remedy

• Check for and remove loose pieces of media from inside the

scanner.

• Verify that the document is not curled, folded, wrinkled, or torn.

• Verify that the document is feeding correctly. Remove the doc-

ument and restart the job if necessary.

• Verify that suitable media is being used. Use only documents

printed on paper recommended by your Xerox Service Repres-

entative.

• Press the green Power button to exit Power Save mode.

• Follow the specific instructions regarding faults or errors in the

software documentation.

• If the condition does not improve, contact your Xerox Service

Representative.

Remedy

• Open and close the scanner.

• Reboot the scanner and rescan.

Make sure the document is at least 152 mm wide by 152 mm

long. Refer to

Documents.

Make sure the scanning area is clean, and whenever it is soiled,

clean the Contact Image Sensor and scanner area.

• Make sure the scanning area is clean, and whenever it is soiled,

clean the Contact Image Sensor and scanner area.

• Perform the normalization procedure. Refer to Normalization.

Verify that the document is inserted correctly, and if necessary,

correctly insert the document, with the edge of the document

aligned with the document guide.

Xerox

Wide Format 7742 Scan Solution

User Guide