Xerox WORKCENTRE C2424 Petunjuk Manual - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Printer Xerox WORKCENTRE C2424. Xerox WORKCENTRE C2424 6 halaman. Copier-printer
Juga untuk Xerox WORKCENTRE C2424: Panduan Referensi Cepat (14 halaman), Brosur (8 halaman), Panduan Tambahan (7 halaman), Spesifikasi (6 halaman), Panduan Pengguna (43 halaman), Panduan Memulai (26 halaman), Panduan Pengguna (21 halaman), Panduan Pengguna (20 halaman), Panduan Pemeliharaan (20 halaman), Panduan Pengguna (19 halaman), Petunjuk Manual (16 halaman), Manual (12 halaman), Panduan Instalasi (4 halaman), Panduan Instalasi (2 halaman), Penggantian Kit Rol Umpan (2 halaman), Setup Manual (2 halaman), Templat Aksesibilitas Produk Sukarela (10 halaman), Perbandingan Kompetitif (3 halaman), Panduan Referensi Cepat (14 halaman), Panduan Servis (11 halaman), Panduan Referensi Cepat (13 halaman)

The power cord is attached to the system as a plug-in device on the side of the system. If it is

necessary to disconnect all electrical power from the system, disconnect the power cord from

the electrical outlet.

Warning

Do not remove the covers or guards that are fastened with screws unless you are installing

optional equipment and are specifically instructed to do so. Power should be OFF when

performing these installations. Disconnect the power cord when removing covers and

guards for installing optional equipment. Except for user-installable options, there are no

parts that you can maintain or service behind these covers.

The following are hazards to your safety:

■

The power cord is damaged or frayed.

Liquid is spilled into the system.

■

The system is exposed to water.

If any of these conditions occur:

Turn off the system immediately.

Disconnect the power cord from the electrical outlet.

Call an authorized service representative.

Maintenance Safety

■

Do not attempt any maintenance procedure that is not specifically described in the

documentation supplied with your system.

Do not use aerosol cleaners. The use of supplies that are not approved may cause poor

■

performance and could create a hazardous condition.

■

Do not burn any consumables or routine maintenance items. For information on Xerox

supplies recycling programs, go to www.xerox.com/gwa.

Operational Safety

Your system and supplies were designed and tested to meet strict safety requirements. These

include safety agency examination, approval, and compliance with established environmental

standards.

Your attention to the following safety guidelines helps to ensure the continued, safe operation

of your system.

System Supplies

■

Use the supplies specifically designed for your system. The use of unsuitable materials

may cause poor performance and a possible safety hazard.

WorkCentre® C2424 Copier-Printer

A-2