Xerox DocuColor 5799 Panduan Tambahan - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Tambahan untuk Mesin fotokopi Xerox DocuColor 5799. Xerox DocuColor 5799 8 halaman. Digital color copier/printer system
Juga untuk Xerox DocuColor 5799: Panduan Referensi (7 halaman), Panduan Referensi (7 halaman), Panduan Referensi (9 halaman), Panduan Memulai (46 halaman), Panduan Referensi (7 halaman)
Halaman Cetak
Expectation Setting Document for the
SEPARATIONS SUPPORT
SEPARATIONS SUPPORT
•
The Fiery Si does not support Trapping and Overprinting
commands. STARR compression cannot support the
"combine separations" feature needed to print trapping and
overprinting successfully.
CUSTOMER SUPPORT
CUSTOMER SUPPORT
•
The Xerox Customer Support Centers are available for
general information, questions, or placing service calls:
USCO
XCI
•
Your Xerox Color Analyst will provide fee-based training
upon request.
REFERENCE MATERIAL
REFERENCE MATERIAL
•
The following documentation is available on the Customer
CD in Acrobat PDF format for more detailed information on
this product:
-Quick Start Guide
-Administrator Guide
-User's Guide
-Operator Guide
-Customer Release Notes (hardcopy only)
Terms and product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged.
Fiery Si v1.2
1-800-821-2797
1-800-939-3769
SPACE REQUIREMENTS
SPACE REQUIREMENTS
•
Refer to the specific Xerox Digital Color Copier Customer
Expectation Setting Guide for reference.
•
The Fiery Si should be positioned such that there is 24
inches (610mm) of unobstructed work area on each side of
the placement.
•
For the DocuColor 5750, the right side measurement is 55"
and the left side measurement is 17".
•
At no time should any overhead obstruction be closer than
6 feet (1828.8mm) over the location of the Fiery Si.
•
The maximum distance between the Fiery Si and the Xerox
Digital Color Copier is limited by the original length of the
interface cable.
POWER REQUIREMENTS
POWER REQUIREMENTS
•
Voltage ranges are from 100-120 VAC and 200-240 VAC.
•
The power supply inside the Fiery Si automatically
configures to either 120 VAC at 60 Hz or 240 VAC at 50
HZ.
•
The Fiery Si requires the use of two outlets: one for the
Fiery Si and one for the CD ROM.
Fiery Si v1.2
MajestiK/ Regal/ Empress/ Countess
Launch Version 9/16/97