Xerox DocuColor 5799 보충 설명서 - 페이지 5
{카테고리_이름} Xerox DocuColor 5799에 대한 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox DocuColor 5799 8 페이지. Digital color copier/printer system
Xerox DocuColor 5799에 대해서도 마찬가지입니다: 참조 매뉴얼 (7 페이지), 참조 매뉴얼 (7 페이지), 참조 매뉴얼 (9 페이지), 시작하기 매뉴얼 (46 페이지), 참조 매뉴얼 (7 페이지)
페이지 인쇄
Expectation Setting Document for the
SEPARATIONS SUPPORT
SEPARATIONS SUPPORT
•
The Fiery Si does not support Trapping and Overprinting
commands. STARR compression cannot support the
"combine separations" feature needed to print trapping and
overprinting successfully.
CUSTOMER SUPPORT
CUSTOMER SUPPORT
•
The Xerox Customer Support Centers are available for
general information, questions, or placing service calls:
USCO
XCI
•
Your Xerox Color Analyst will provide fee-based training
upon request.
REFERENCE MATERIAL
REFERENCE MATERIAL
•
The following documentation is available on the Customer
CD in Acrobat PDF format for more detailed information on
this product:
-Quick Start Guide
-Administrator Guide
-User's Guide
-Operator Guide
-Customer Release Notes (hardcopy only)
Terms and product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged.
Fiery Si v1.2
1-800-821-2797
1-800-939-3769
SPACE REQUIREMENTS
SPACE REQUIREMENTS
•
Refer to the specific Xerox Digital Color Copier Customer
Expectation Setting Guide for reference.
•
The Fiery Si should be positioned such that there is 24
inches (610mm) of unobstructed work area on each side of
the placement.
•
For the DocuColor 5750, the right side measurement is 55"
and the left side measurement is 17".
•
At no time should any overhead obstruction be closer than
6 feet (1828.8mm) over the location of the Fiery Si.
•
The maximum distance between the Fiery Si and the Xerox
Digital Color Copier is limited by the original length of the
interface cable.
POWER REQUIREMENTS
POWER REQUIREMENTS
•
Voltage ranges are from 100-120 VAC and 200-240 VAC.
•
The power supply inside the Fiery Si automatically
configures to either 120 VAC at 60 Hz or 240 VAC at 50
HZ.
•
The Fiery Si requires the use of two outlets: one for the
Fiery Si and one for the CD ROM.
Fiery Si v1.2
MajestiK/ Regal/ Empress/ Countess
Launch Version 9/16/97