Xerox DocuColor DocuColor 4 Panduan Memulai Cepat - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Mesin fotokopi Xerox DocuColor DocuColor 4. Xerox DocuColor DocuColor 4 26 halaman. Copier/printer
Juga untuk Xerox DocuColor DocuColor 4: Panduan Tambahan (18 halaman), Mengenal Buku Panduan (20 halaman)

Xerox DocuColor DocuColor 4 Panduan Memulai Cepat

Activity 1: Loading paper

You will need a ream of paper for this activity.

Loading paper in the paper trays

Demonstrate the steps as you describe them.
You may have three paper trays. To load paper in a
paper tray:
1. Face the DocuColor 4 Copier/Printer so that you
are directly in front of the paper tray.
2. See Figure 1. Open the tray by pulling it straight
out.
3. Press down on the metal plate until it latches.
4. Take the paper out of the wrapper.
5. See Figure 2. Move the paper guides toward the
outer edges of the paper drawer.
6. Place the stack of paper in the drawer with the cor-
ners under the fluke at the front right side. Add
paper up to the Max line. Straighten the paper
stack so the edges are even.
7. See Figure 3. Set the rear paper guide to the length
of the paper.
8. Set the side paper guide to the width of the paper.
Note: Align the "t" mark on the side paper guide
with the appropriate paper size mark on the tray. If
the side guide is out of position, automatic paper
size detection will not work.
9. Close the tray by pushing it completely into the
copier/printer.
2
2
Figure 1
5
5
Figure 2
7
8
Figure 3
Getting to Know Your Product
3
6
9
QuickStart Practice Guide