Xerox DocuColor DocuColor 4 빠른 시작 매뉴얼 - 페이지 6
{카테고리_이름} Xerox DocuColor DocuColor 4에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox DocuColor DocuColor 4 26 페이지. Copier/printer
Xerox DocuColor DocuColor 4에 대해서도 마찬가지입니다: 보충 설명서 (18 페이지), 매뉴얼 알아보기 (20 페이지)
페이지 인쇄
Activity 1: Loading paper
You will need a ream of paper for this activity.
Loading paper in the paper trays
Demonstrate the steps as you describe them.
You may have three paper trays. To load paper in a
paper tray:
1. Face the DocuColor 4 Copier/Printer so that you
are directly in front of the paper tray.
2. See Figure 1. Open the tray by pulling it straight
out.
3. Press down on the metal plate until it latches.
4. Take the paper out of the wrapper.
5. See Figure 2. Move the paper guides toward the
outer edges of the paper drawer.
6. Place the stack of paper in the drawer with the cor-
ners under the fluke at the front right side. Add
paper up to the Max line. Straighten the paper
stack so the edges are even.
7. See Figure 3. Set the rear paper guide to the length
of the paper.
8. Set the side paper guide to the width of the paper.
Note: Align the "t" mark on the side paper guide
with the appropriate paper size mark on the tray. If
the side guide is out of position, automatic paper
size detection will not work.
9. Close the tray by pushing it completely into the
copier/printer.
2
2
Figure 1
5
5
Figure 2
7
8
Figure 3
Getting to Know Your Product
3
6
9
QuickStart Practice Guide