Xerox WorkCentre M128 Petunjuk Produksi Ulang - Halaman 10

Jelajahi secara online atau unduh pdf Petunjuk Produksi Ulang untuk Mesin fotokopi Xerox WorkCentre M128. Xerox WorkCentre M128 14 halaman. Drum cartridge remanufacturing
Juga untuk Xerox WorkCentre M128: Panduan Evaluator (12 halaman), Brosur & Spesifikasi (6 halaman), Instal Manual (2 halaman), Manual Jaringan (50 halaman), Manual Pemindaian (28 halaman), Kartu Instalasi Cepat (2 halaman), Panduan Referensi (20 halaman), Panduan Pengaturan Jaringan Cepat (7 halaman), Panduan Servis (22 halaman)

Halaman Cetak
Xerox WorkCentre M128 Petunjuk Produksi Ulang
23. Snap the cover back in place.
Make sure all three tabs lock!
25. Install the plastic spring arm and the screw to hold it in
place (sliding the cover over allows the spring arm to fit
correctly).
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
XEROX WORKCENTRE M118 • 128 DRUM CARTRIDGE REMANUFACTURING INSTRUCTIONS
24. Install the back screw in front of the metal cover.
26. On the opposite side, install the screw into the metal
contact.
www.uninetimaging.com