Xerox WorkCentre M128 Petunjuk Produksi Ulang - Halaman 8

Jelajahi secara online atau unduh pdf Petunjuk Produksi Ulang untuk Mesin fotokopi Xerox WorkCentre M128. Xerox WorkCentre M128 14 halaman. Drum cartridge remanufacturing
Juga untuk Xerox WorkCentre M128: Panduan Evaluator (12 halaman), Brosur & Spesifikasi (6 halaman), Instal Manual (2 halaman), Manual Jaringan (50 halaman), Manual Pemindaian (28 halaman), Kartu Instalasi Cepat (2 halaman), Panduan Referensi (20 halaman), Panduan Pengaturan Jaringan Cepat (7 halaman), Panduan Servis (22 halaman)

Halaman Cetak
Xerox WorkCentre M128 Petunjuk Produksi Ulang
17. Remove the screw from the contact plate on the opposite
side of the hopper.
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
XEROX WORKCENTRE M118 • 128 DRUM CARTRIDGE REMANUFACTURING INSTRUCTIONS
16. Remove the plastic spring arm, and the two screws.
18. Carefully pry up the three plastic tabs on the back edge of
the cartridge.
www.uninetimaging.com