Xerox WorkCentre M128 Remanufacturing Instructions - Page 8

Browse online or download pdf Remanufacturing Instructions for Copier Xerox WorkCentre M128. Xerox WorkCentre M128 14 pages. Drum cartridge remanufacturing
Also for Xerox WorkCentre M128: Evaluator Manual (12 pages), Brochure & Specs (6 pages), Install Manual (2 pages), Network Manual (50 pages), Scan Manual (28 pages), Quick Installation Card (2 pages), Reference Manual (20 pages), Quick Network Setup Manual (7 pages), Service Manual (22 pages)

Print Page
Xerox WorkCentre M128 Remanufacturing Instructions
17. Remove the screw from the contact plate on the opposite
side of the hopper.
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
XEROX WORKCENTRE M118 • 128 DRUM CARTRIDGE REMANUFACTURING INSTRUCTIONS
16. Remove the plastic spring arm, and the two screws.
18. Carefully pry up the three plastic tabs on the back edge of
the cartridge.
www.uninetimaging.com