Xerox WorkCentre M128 Remanufacturing Instructions - Page 7

Browse online or download pdf Remanufacturing Instructions for Copier Xerox WorkCentre M128. Xerox WorkCentre M128 14 pages. Drum cartridge remanufacturing
Also for Xerox WorkCentre M128: Evaluator Manual (12 pages), Brochure & Specs (6 pages), Install Manual (2 pages), Network Manual (50 pages), Scan Manual (28 pages), Quick Installation Card (2 pages), Reference Manual (20 pages), Quick Network Setup Manual (7 pages), Service Manual (22 pages)

Print Page
Xerox WorkCentre M128 Remanufacturing Instructions
12. Install the new wiper blade and two screws.
14. Place the drum in the hopper and carefully place aside.
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
XEROX WORKCENTRE M118 • 128 DRUM CARTRIDGE REMANUFACTURING INSTRUCTIONS
13. Clean the PCR with your normal cleaner. Wipe off the old
conductive grease from the shaft and replace. Re-install the
PCR in the assembly grease side to the black PCR holder.
15. On the developer roller side, remove the two springs from
the metal slide cover.
www.uninetimaging.com