Xerox WorkCentre M128 Instructies voor herfabricage - Pagina 7

Blader online of download pdf Instructies voor herfabricage voor {categorie_naam} Xerox WorkCentre M128. Xerox WorkCentre M128 14 pagina's. Drum cartridge remanufacturing
Ook voor Xerox WorkCentre M128: Handleiding voor beoordelaars (12 pagina's), Brochure & specificaties (6 pagina's), Installatiehandleiding (2 pagina's), Netwerkhandleiding (50 pagina's), Handleiding scannen (28 pagina's), Kaart voor snelle installatie (2 pagina's), Referentiehandleiding (20 pagina's), Handleiding voor snelle netwerkinstallatie (7 pagina's), Servicehandleiding (22 pagina's)

Pagina afdrukken
Xerox WorkCentre M128 Instructies voor herfabricage
12. Install the new wiper blade and two screws.
14. Place the drum in the hopper and carefully place aside.
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
XEROX WORKCENTRE M118 • 128 DRUM CARTRIDGE REMANUFACTURING INSTRUCTIONS
13. Clean the PCR with your normal cleaner. Wipe off the old
conductive grease from the shaft and replace. Re-install the
PCR in the assembly grease side to the black PCR holder.
15. On the developer roller side, remove the two springs from
the metal slide cover.
www.uninetimaging.com