Xerox Phaser 750DX Panduan Servis - Halaman 20

Jelajahi secara online atau unduh pdf Panduan Servis untuk Aksesori Printer Xerox Phaser 750DX. Xerox Phaser 750DX 40 halaman. Digital color printer / copier
Juga untuk Xerox Phaser 750DX: Spesifikasi (2 halaman), Brosur & Spesifikasi (4 halaman), Panduan Referensi (8 halaman), Manual (9 halaman)

Halaman Cetak
Xerox Phaser 750DX Panduan Servis
Status
Code
07-281,
The control logic sensed a timing error for the Lift Up Time of Tray 1(07-281), Tray 2 (07-282), Tray 3 (07-283) or Tray
282, 283,
4 (07-284).
284
Initial action:
Switch off the machine power.
Power the machine on.
If the problem still exists:
Place a service call.
Tray Load
The control logic has sensed that no paper is being detected in one of the paper trays.
Paper for
Initial action:
Tray 1, Tray
Go to the Paper Tray which was selected on the Control Panel and verify that the Paper Size Indicator is set
2, Tray 3,
to the correct paper size that is loaded in the Paper Tray.
Tray 4, or
the Bypass
Go to the Paper Tray which was selected on the Control Panel and verify that the paper is loaded correctly.
Tray
For the appropriate tray, clean the Tray Feed, Retard, Nudger, Preregistration and Registration Rolls with a
damp cloth (water). (REP 5.22) (REP 5.24)
NOTE : Check for obvious damage, missing or broken Drive Motor gear assemblies and drive belts. These
items may cause a sensor failure to be displayed as an operator error message.
If the problem still exists:
Place a service call.
Fault Code Procedures
Description/Direction
5/98
2-20
5750 DocuCare Service Manual