Xerox Phaser 750DX Посібник з експлуатації - Сторінка 20

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Аксесуари для принтерів Xerox Phaser 750DX. Xerox Phaser 750DX 40 сторінок. Digital color printer / copier
Також для Xerox Phaser 750DX: Технічні характеристики (2 сторінок), Брошура та технічні характеристики (4 сторінок), Довідковий посібник (8 сторінок), Посібник (9 сторінок)

Status

Code

07-281,

The control logic sensed a timing error for the Lift Up Time of Tray 1(07-281), Tray 2 (07-282), Tray 3 (07-283) or Tray

282, 283,

4 (07-284).

284

Initial action:

Switch off the machine power.

Power the machine on.

If the problem still exists:

Place a service call.

Tray Load

The control logic has sensed that no paper is being detected in one of the paper trays.

Paper for

Initial action:

Tray 1, Tray

Go to the Paper Tray which was selected on the Control Panel and verify that the Paper Size Indicator is set

2, Tray 3,

to the correct paper size that is loaded in the Paper Tray.

Tray 4, or

the Bypass

Go to the Paper Tray which was selected on the Control Panel and verify that the paper is loaded correctly.

Tray

For the appropriate tray, clean the Tray Feed, Retard, Nudger, Preregistration and Registration Rolls with a

damp cloth (water). (REP 5.22) (REP 5.24)

NOTE : Check for obvious damage, missing or broken Drive Motor gear assemblies and drive belts. These

items may cause a sensor failure to be displayed as an operator error message.

If the problem still exists:

Place a service call.

Fault Code Procedures

Description/Direction

5/98

2-20

5750 DocuCare Service Manual