Xerox Phaser 7750 Manual Warna - Halaman 3

Jelajahi secara online atau unduh pdf Manual Warna untuk Perangkat lunak Xerox Phaser 7750. Xerox Phaser 7750 4 halaman. Color laser printer
Juga untuk Xerox Phaser 7750: Spesifikasi (4 halaman), Panduan Pengguna (35 halaman), Brosur (8 halaman), Panduan Pemilik (4 halaman), Spesifikasi (2 halaman), Manual Jaringan (8 halaman), Pengaturan Cepat (5 halaman), Panduan Tambahan (5 halaman), Manuallines (5 halaman), Panduan Tambahan (2 halaman), Panduan Tambahan (16 halaman), Instal Manual (6 halaman), Panduan Pemilik (19 halaman), Panduan Pemilik (3 halaman), Panduan Pemeliharaan (1 halaman), Panduan Instalasi (33 halaman), Panduan Referensi Cepat (8 halaman), Panduan Servis (14 halaman), Panduan Referensi Cepat (8 halaman), Panduan Referensi Cepat (8 halaman), Setup Manual (2 halaman), Dokumentasi Pengguna (17 halaman), Setup Manual (2 halaman), Menambahkan Memori Secara Manual (2 halaman)

To select the color correction in a supported driver:

■

Windows 98, Windows Me PostScript driver:

On the TekColor tab, select the desired color correction. Some of the color corrections are

grouped under Office Color or Press Match.

■

Windows 2000, Windows XP, Windows Server 2003, Windows NT PostScript driver:

On the TekColor tab, select the desired color correction. Some of the color corrections are

grouped under Office Color or Press Match.

■

Mac OS 9 driver:

In the Print dialog box, click General, select TekColor from the drop-down list, then

select the desired correction for Color.

■

Mac OS X (version 10.1 and higher) driver:

In the Print dialog box, select Image Quality from the drop-down list, then select the

desired color correction option from the Color Correction drop-down list.

Color Calibration

Overview

Color calibration procedures adjust the printer for optimal color output. Color settings may

need adjustment upon initial printer setup or when toners and imaging units are replaced.

There are two procedures: Balance Colors and Lighten/Darken Colors. If a finer adjustment of

the primary colors (cyan, magenta, and yellow) is needed, start with the Balance Colors

procedure. If the overall image appears either too light or dark, use the Lighten/Darken Colors

procedure. For more information on color calibration, print the "Color Calibration"

information page from your printer's front panel.

For more information on color calibration, print the "Color Calibration" information page

from your printer's front panel.

To print the "Color Calibration" pages:

At the printer's front panel, select

Select

Calibration

Setup, then press the OK button.

Calibrate

Colors, then press the OK button.

Select

Select a color calibration option from the list displayed, then press the OK button.

Follow the front panel prompts to perform the calibration procedure.

Note

For more information on color matching and International Color Consortium (ICC)

profiles, go to www.xerox.com/office/infoSMART.

Printer

Setup, then press the OK button.

Phaser® 7750 Color Laser Printer

2-37

Using Color