Xerox Phaser 7750 컬러 매뉴얼 - 페이지 3

{카테고리_이름} Xerox Phaser 7750에 대한 컬러 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Phaser 7750 4 페이지. Color laser printer
Xerox Phaser 7750에 대해서도 마찬가지입니다: 사양 (4 페이지), 사용자 설명서 (35 페이지), 브로셔 (8 페이지), 소유자 매뉴얼 (4 페이지), 사양 (2 페이지), 네트워크 매뉴얼 (8 페이지), 빠른 설정 (5 페이지), 보충 설명서 (5 페이지), 매뉴얼 (5 페이지), 보충 설명서 (2 페이지), 보충 설명서 (16 페이지), 설치 매뉴얼 (6 페이지), 소유자 매뉴얼 (19 페이지), 소유자 매뉴얼 (3 페이지), 유지 관리 매뉴얼 (1 페이지), 설치 매뉴얼 (33 페이지), 빠른 참조 매뉴얼 (8 페이지), 서비스 매뉴얼 (14 페이지), 빠른 참조 매뉴얼 (8 페이지), 빠른 참조 매뉴얼 (8 페이지), 설정 매뉴얼 (2 페이지), 사용자 문서 (17 페이지), 설정 매뉴얼 (2 페이지), 메모리 추가 매뉴얼 (2 페이지)

To select the color correction in a supported driver:

■

Windows 98, Windows Me PostScript driver:

On the TekColor tab, select the desired color correction. Some of the color corrections are

grouped under Office Color or Press Match.

■

Windows 2000, Windows XP, Windows Server 2003, Windows NT PostScript driver:

On the TekColor tab, select the desired color correction. Some of the color corrections are

grouped under Office Color or Press Match.

■

Mac OS 9 driver:

In the Print dialog box, click General, select TekColor from the drop-down list, then

select the desired correction for Color.

■

Mac OS X (version 10.1 and higher) driver:

In the Print dialog box, select Image Quality from the drop-down list, then select the

desired color correction option from the Color Correction drop-down list.

Color Calibration

Overview

Color calibration procedures adjust the printer for optimal color output. Color settings may

need adjustment upon initial printer setup or when toners and imaging units are replaced.

There are two procedures: Balance Colors and Lighten/Darken Colors. If a finer adjustment of

the primary colors (cyan, magenta, and yellow) is needed, start with the Balance Colors

procedure. If the overall image appears either too light or dark, use the Lighten/Darken Colors

procedure. For more information on color calibration, print the "Color Calibration"

information page from your printer's front panel.

For more information on color calibration, print the "Color Calibration" information page

from your printer's front panel.

To print the "Color Calibration" pages:

At the printer's front panel, select

Select

Calibration

Setup, then press the OK button.

Calibrate

Colors, then press the OK button.

Select

Select a color calibration option from the list displayed, then press the OK button.

Follow the front panel prompts to perform the calibration procedure.

Note

For more information on color matching and International Color Consortium (ICC)

profiles, go to www.xerox.com/office/infoSMART.

Printer

Setup, then press the OK button.

Phaser® 7750 Color Laser Printer

2-37

Using Color