Xerox WorkCentre 238 Panduan Tambahan - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Tambahan untuk Perangkat lunak Xerox WorkCentre 238. Xerox WorkCentre 238 20 halaman. Xerox multifunction printers detailed specifications
Juga untuk Xerox WorkCentre 238: Panduan Referensi (27 halaman), Spesifikasi (21 halaman), Panduan Evaluator (27 halaman)

Halaman Cetak

Copying using Build Job

Build Job allows the document to be broken into several segments and copied

segment by segment with different settings applied to each segment. This section

describes how to copy an original document containing printed tab dividers.

Note:

Load the tab stock into the paper trays

Load the tab stock into either the Bypass Tray, Tray 1 or Tray 2 as described in Section

2, Setup on page 3.

Program Build Job

The job must be divided into segments. Each divider will be a segment and each part

of the body of the document between the dividers will be a segment.

Input the number of sets you require.

Select the Job Assembly tab.

Select Sample Set, select On

and Save. This will enable you

to print one sample set to

ensure that you have

programmed the job correctly.

From the Job Assembly screen

select Build Job.

Xerox CopyCentre, WorkCentre, WorkCentre Pro 232/238/245/255/265/275 Tab Supplement

The original printed tab dividers MUST be copied from the document glass

while the body of the original can be copied using the document handler.