Xerox WorkCentre 238 보충 설명서 - 페이지 14

{카테고리_이름} Xerox WorkCentre 238에 대한 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox WorkCentre 238 20 페이지. Xerox multifunction printers detailed specifications
Xerox WorkCentre 238에 대해서도 마찬가지입니다: 참조 매뉴얼 (27 페이지), 사양 (21 페이지), 평가자 매뉴얼 (27 페이지)

Xerox WorkCentre 238 보충 설명서
4

Copying using Build Job

Build Job allows the document to be broken into several segments and copied
segment by segment with different settings applied to each segment. This section
describes how to copy an original document containing printed tab dividers.
Note:
Load the tab stock into the paper trays
Load the tab stock into either the Bypass Tray, Tray 1 or Tray 2 as described in Section
2, Setup on page 3.
Program Build Job
The job must be divided into segments. Each divider will be a segment and each part
of the body of the document between the dividers will be a segment.
1
Input the number of sets you require.
2
Select the Job Assembly tab.
3
Select Sample Set, select On
and Save. This will enable you
to print one sample set to
ensure that you have
programmed the job correctly.
4
From the Job Assembly screen
select Build Job.
12
Xerox CopyCentre, WorkCentre, WorkCentre Pro 232/238/245/255/265/275 Tab Supplement
The original printed tab dividers MUST be copied from the document glass
while the body of the original can be copied using the document handler.